4mm*0.3mm Gr1 titanium tube

ASTM B338/B337/B681 1).Grade:Gr1,Gr2,Gr3,Gr5,Gr7,Gr9,Gr12,Gr16,Gr17 2).OD:2mm-168mm 3).T:0.2mm-60mm 4).L:<=18000mm

Gr1 seamless titanium tube

1.Grade:Gr1,Gr2,Gr3,Gr5,Gr7,Gr9,Gr11,Gr12,Gr16,Gr17,Gr23

2.OD:2mm-219mm

3.WT:0.3mm-15.24mm

4.L:with in 18Meters

5.Standard:ASTM B337,ASTM B338,ASTM B861

6.Surface Treatment:polished or according to customer's requirement.

7.Final product test: Ultrasonic test, Eddy current test, Hydraulic test, Bend test, Flaring test and so on.

8.Packing:Seaworthy wooden case

9.Mininum order:20KGS

10.Third party inspection: acceptable.

Other Grade:

A).Seamless titanium tube range:

OD:2.0mm-219mm

WT:0.3mm-120mm

Length: <18000mm

Material:Gr1, Gr2, Gr3, Gr4 Gr5, Gr7, Gr9, Gr11, Gr12, Gr16,Gr17, Gr23 

B).Welded titanium tube range:

OD:6mm-219mm

WT:0.5mm-10mm

Length:<18000mmMaterial: Gr1,Gr2,Gr3,Gr5,Gr9

1). Allowable Deviation of Outer Diameter (mm)

2). Allowable Deviation of Wall Thickness is not more than±10% of the Nominal WT

3). Curvature of Titanium Tube

Outer Diameter (mm)	Curvature (mm/m, not more than)
≤30	3
>30~110	4

4).ASME GR1/2 Mechanical Properties(Composion%)

Tensile Strength(Mpa)	Yield Strength0.2%(Mpa)	Elongation(%)
460	325	25

5).ASME Gr2 Product Analysis(Composition%)

6).Application:

1.Heat exchangers and condensers

2.All kinds of corrosive fluid transmission pipeline system.

3.Titanium bicycle tube,automobile exhaust pipe.

4.Offshore aquaculture.

5.U type heat exchanger coil pipe ;Condenser; petroleum pipeline ; Sea farming

6.Evaporimeter;Fluid Transporation Piping etc.

7.Chlorine alkali, spaceflight, desalination , pure alkali,vacuum salt manufacturing, aviation spaceflight,, nuclear power, petrifactionindustry, medication sports equipments

7).Detail:

CP grade 1 can be used in the deep drawing parts for its good elongation and excellent corrosion-resistance.

CP grade 2 is used the most widely in the commercially pure titanium.

CP grade 3 is almost only used in pressure vessel.

CP grade 4 can be use in some fittings parts and fastening pieces, but for complex shape need 300 degree celsius to form.

Alloy grade 5, Ti-6Al-4V, is the most widely used in the titanium alloys because of its comprehensive mechanical, physical and chemical properties.

Alloy grade 7, add little palladium in cp titanium and it has the most excellent corrosion-resistance. Of course it costs higher.

Alloy grade 9, Ti-3Al-2.5V, is the most widely used in the golf clubs and bicycle girders.

Alloy grade 12, it has the similar properties with the grade 7 but costs lesser.

Alloy grade 23, Ti-6Al-4V ELI (Extra Low Interstitial) can be use in the medical appliance.

Products key word : Titanium tube , seamless titanium tube , Titanium pipe , Titanium tubing , tubing , piping.

4mm*0.3mm Gr1 titanium tube